Set Up Folding Accordion Door Hardware

0

Accordion door hardware – Accordion doors usually come in sets. Most sets include folding door prevailed screw holes on one side for mounting on a doorjamb, an upper track, locking tapes and hardware for installation. Most sets also come with a lower track that may or may not be installed. Many sets come in standard sizes, and their height can be cut.

Gauge the width of the accordion door hardware. Assess the height of the space in three locations: middle, right and left. Use the shortest of these measurements to be sure that the doors did not pull when they are installed. Buy accordion door set based on the measurements in the preceding step. If necessary, cut the folding door to the proper height. Hold the top track at the top of the opening to make sure it fits. Map position. Cut it to size with a hacksaw, if it is too long. Dry the pure metal particles.

See Also:  Sliding Door

Stand door vertically on the floor, hanging wheels are on top. Slide the track on wheels one at a time and make sure they are properly seated. Ask a friend to help you in the accordion door hardware and then track into the doorway. Slide the door out of the way and screw one end of the field to the doorjamb in the position you selected in Step 3. Installing a couple of screws in this step. Slide door to the other end of the field and then install the remaining screws. Be sure that the track is properly installed in the perfect place, and the door slides easily into the track in both directions.

See Also:  Door Hardware

These are reader choosen ideas accordion door

Share.

Comments are closed.