Ideas for Build Rustic TV Stand

0

A two-piece wooden TV stand supports many TVs and allows room for gaming or movie systems. Consumables and timber required to create a wooden TV stand can be found in construction markets. Tools and equipment may also be bought in discount or hardware stores.

Stand the very best portrait so that the 43 1/2 inch edge is flat. Put a side bit (19 inches long perpendicular ) below the upper piece so they flush shape a large L. This is the left and top side rack. Then you will join the left side to the top. Face the top bit. Measure 1 inch from the upper left corner along with 1/2 inch from the top is out the left border. Use a drill with a screwdriver bit to attach a twist through the pen mark. You will attach three screws through the surface of the surface of the side bit.

Step 1 inch up from the upper bottom left corner along with 1/2 inch from the top is out the left border. Twist a wooden screw through the top piece and at the upper border of the side bit. Measure from the very first twist down 11 inches and then 1/2 inch from the outside edge. Twist a screw through the top into the top border of the left side. This tree L now includes three screws. Make a pencil mark under the upper bit. Adjust the divider piece with the pen tagged, so the position looks like a capital F. Screw the wood screws through the top piece and also into the divider piece top border. Adjust the rest of the side flush with the right edge of the top bit that represents a funding E. Face the upper bit. Step 1 inch from the upper corner along with 1/2 inch from the top is out the right edge.How to build a rustic corner television stand,

Best Post:   Perfect Wall Bed IKEA Design
Share.

Comments are closed.